Legal Descriptions on the NJ Exam: Metes and Bounds, Lot and Block and Government Survey
The short answer: The NJ salesperson exam tests three legal-description systems under Property Ownership: metes and bounds, lot and block (a recorded plat), and the government or rectangular survey. That section is 10% of the exam, and legal descriptions sit with land characteristics, measuring structures and land measurement (PSI candidate bulletin). New Jersey's survey rules allow deed descriptions by metes and bounds or by a filed plan, block and lot. The rectangular survey still shows up on the test because it's on the national outline.
This page goes deeper on one part of property ownership on the NJ exam. For format and scoring, see our NJ real estate exam guide.
What is a legal description, and why does the exam care?
A legal description identifies a parcel precisely enough to locate its boundaries. An address isn't enough for a deed. New Jersey's survey rules say a description used for a title transfer, easement or mortgage must be "unambiguous and sufficient for a surveyor to lay it out on the ground," and it must be by metes and bounds or by reference to a filed plan, block and lot (N.J.A.C. 13:40-5.1(i)1).
Exam questions ask you to name the method, spot the parts of each system and do simple area math.
How does a metes and bounds description work?
"Metes" are measurements: distances and directions, or courses. "Bounds" are the boundaries those measurements follow, often tied to monuments. A typical description starts at a point of beginning (POB), then walks the sides of the parcel and returns to that point so the figure closes.
New Jersey expects that same structure on a survey plat. The plat must show a north arrow and the survey's horizontal datum, a scale, the point of beginning, and the metes and bounds of the property, with measurements in feet and decimals of a foot unless another unit is required (N.J.A.C. 13:40-5.1(f)). It also shows corner markers found or set. Those physical markers are the monuments exam questions like to mention: an iron pipe, a concrete monument, a marked tree, a stone or a stream.
If a question gives bearings and distances from a starting point and asks which method it is, the answer is metes and bounds.
How does lot and block (recorded plat) work?
A subdivision map, or "filed plan," is recorded with the county. Each lot on it has a number, usually within a block, and a deed can describe the land by pointing to that lot on that plan. This is what the national outline calls "lot and block (recorded plat)." New Jersey's survey rule matches it: a deed description may be "by reference to a filed plan, block, and lot," and if you use that method you must set out the entire title of the filed plan, the filed plan number and the date it was recorded. If the completed survey doesn't match the filed plan, you can't use the filed-plan shortcut (N.J.A.C. 13:40-5.1(i)1).
To record a deed in New Jersey, the instrument must also give the municipal tax map lot and block, or an account number (N.J.S.A. 46:26A-3). That's a recording requirement that sits beside the legal description, not a replacement for it. For how deeds are prepared and recorded, see types of deeds in NJ.
Is a tax map the same as a recorded plat?
No, and this is a useful exam (and practice) distinction. A New Jersey tax map is a scaled map that shows every lot, identified by a block and lot number, for the assessor (N.J.A.C. 18:23A-1.1). It's a tax tool.
The Board of Professional Engineers and Land Surveyors is direct on this point. A surveyor "shall not rely on a tax map for purposes of defining metes and bounds." And "it shall also be improper to use or reference a municipal tax map to comply with the requirements for deed description by reference to a filed plat. A tax map shall not be deemed a filed plan for the purpose of title transfer" (N.J.A.C. 13:40-5.1(b), (i)2).
So a deed that describes land only by the tax map lot and block has a problem. Our property survey guide explains what a survey actually shows.
How does the government (rectangular) survey work?
This is the Public Land Survey System used in the public-land states. Federal survey rules divide public lands by north-south lines and east-west lines crossing at right angles, "so as to form townships of six miles square" (43 U.S.C. 751). Each township is divided into sections of about 640 acres, one mile on a side. The sections are numbered 1 through 36, beginning with number 1 in the northeast section and running west and east alternately until 36 is completed.
The Bureau of Land Management lists 30 "public land states," including Ohio, Florida, Illinois and California. New Jersey isn't one of them (BLM, Public Land Statistics 2025). A BLM classroom guide notes that the other 20 states use other systems, such as colonial land grants (BLM cadastral surveying guide).
You still need the grid for the exam. A common description looks like "the NW 1/4 of the SE 1/4 of Section 14, Township 3 North, Range 2 West of the [principal meridian]." Read it backwards: start with the section, then the quarter, then the quarter-quarter. The NW 1/4 of the SE 1/4 is a 40-acre parcel (one-quarter of 160 acres).
What measurement facts should you memorize?
The outline also lists measuring structures (linear and square footage) and land measurement. These figures show up in both legal-description and math items. Conversion drills are in area and acreage math.
- 1 acre = 43,560 square feet
- 1 section = 1 square mile = 640 acres
- 1 township = 6 miles by 6 miles = 36 sections
- 1 chain = 66 feet, and 10 square chains = 1 acre
All four come from the BLM cadastral surveying guide.
Can you answer these self-checks?
- A deed starts at an iron pipe, then runs "south 15 degrees east 200 feet" and continues around the lot back to the pipe. Which method is this? Metes and bounds, starting at a point of beginning.
- A deed refers to "Lot 8, Block 22, as shown on a filed plan recorded in the county recording office." Which method is this? Lot and block (recorded plat).
- Can a New Jersey deed use only the municipal tax map lot and block as its legal description for a title transfer? No. A tax map is not a filed plan for that purpose (N.J.A.C. 13:40-5.1(i)2).
- How many acres are in the SW 1/4 of a standard section? 160 acres (one-quarter of 640).
Legal descriptions are part of Property Ownership on the exam, which Business Elementary's 75-hour pre-licensing course covers. You can also drill with the practice exams.
Sources
- PSI New Jersey Real Estate Candidate Information Bulletin (updated 2/1/2026), Property Ownership outline I.B: https://test-takers.psiexams.com/api/content/bulletin/1667
- N.J.A.C. 13:40-5.1 (land surveying procedures and practices), via Cornell LII: https://www.law.cornell.edu/regulations/new-jersey/N-J-A-C-13-40-5-1
- N.J.A.C. 18:23A-1.1 (tax maps defined), via Cornell LII: https://www.law.cornell.edu/regulations/new-jersey/N-J-A-C-18-23A-1-1
- N.J.S.A. 46:26A-3 (deed recording requirements, including tax map lot and block), via Justia: https://law.justia.com/codes/new-jersey/title-46/section-46-26a-3/
- 43 U.S.C. 751 (rules of survey), via Cornell LII: https://www.law.cornell.edu/uscode/text/43/751
- U.S. Bureau of Land Management, Public Land Statistics 2025 (30 public land states): https://www.blm.gov/sites/default/files/docs/2026-08/BLM-Public-Land-Statistics-2025.pdf
- U.S. Bureau of Land Management, Classroom Investigation: Cadastral Surveying (township, section and chain measures): https://www.blm.gov/sites/default/files/docs/2023-05/Classroom%20Investigation%20Cadastral%20Surveying.pdf
Last reviewed: November 20, 2026
Business Elementary